BIM Expansion, Holley EFI Interface Dakota Digital BIM012HLLY
Posted on by
Bim 01 2. Dakota Digital BIM012 Obd Interface Team Camaro Tech The BIM menu of the display will not find the BIM-01-2, unless Boost is enabled for boosted 2009+ GM applications Instruction Sheets for Part Number DAK-BIM-01-2 BIM-01-2 Instructions 437 KB Some parts are not legal for use in California or other states with similar laws / regulations
Dakota Digital BIM012HAL from www.summitracing.com
Speed and RPM data are transmitted and updated every 0.1 second, on a dedicated bus to the display box processor Page 5 BIM setup: Enable or disable engine indicator status from the BIM-01-2 • Hold the switch on the BIM-01-2 case while turning the key on
Dakota Digital BIM012HAL
The BIM display will show the current revision code while this is held Earlier control boxes (with an aluminum case) are not compatible with the BIM family of Expansion Modules The BIM-01-2 normally does not use one of the 16 available bus ID's like other Dakota Digital BIM units do
Dakota Digital BIM012HLLY Holley EFI Interface Module. The BIM menu of the display will not find the BIM-01-2, unless Boost is enabled for boosted 2009+ GM applications The following settings are for the basic information to be displayed with data from the BIM module
BIM Expansion, Edelbrock EFI Interface Dakota Digital BIM012EDBK. Page 5 BIM setup: Enable or disable engine indicator status from the BIM-01-2 • Hold the switch on the BIM-01-2 case while turning the key on It supports J1850 and CAN OBD-II protocols and various vehicle-specific information.